The easiest way to tell which rotor is on the vehicle
is from the ball joints.
If the upper ball joint uses a "castle
nut and a cotter pin" it is the Dana 28 system and would take the BD60693.
If the upper ball joint uses a "Pinch
Bolt" it will be Dana 35 system and take the BD125160.
Some have described this pinch bolt as a "Snap Ring and Bolt."
If you attempt to sell either of these items by the size (2.2 or 2.5),
chances are the mechanic will measure in the wrong area and get it wrong. You will
wind up making two trips. |